Add a guide rod laser to transform your Glock 43 into a more accurate and precise firearm. This step-by-step guide ensures a seamless Glock 43 LaserMax installation process, allowing you to enhance your shooting experience. All you need are Duracell 357 batteries and the original Allen key with your Glock 43.
Step-by-Step Guide: Glock 43 LaserMax Installation
Step 1: Prepare the Batteries
- Begin by securing the required Duracell 357 batteries. These batteries are typically sold in a three-pack and can be found at most local hardware stores. The battery packaging may list numbers 303, 357, and 76, but they are all compatible with your Glock 43 guide rod laser. These batteries are crucial for ensuring a bright and powerful laser.
- Additionally, locate the original Allen key that came with your firearm. This key is essential for accessing and manipulating the internal components.
Step 2: Access the Laser Housing
- Your Glock 43 has a top panel on the frame that covers the laser housing. In some cases, there might be a protective sticker on this panel. If so, ensure that it is intact, as it gives an extra protection layer for the laser housing.
- Using the Allen key, carefully remove the screw securing the top panel covering the laser housing. This screw may stay captured in the housing, so once it’s sufficiently loosened, gently tap the firearm to allow the assembly to slide out.
Step 3: Remove Laser Assembly
- After removing the top panel, you’ll gain access to the laser assembly. Inside, you’ll find two batteries that power the guide rod laser. Be cautious when handling these batteries, and take note of their orientation, as you’ll need to replicate it during reassembly.
- To extract the batteries, carefully tip the firearm, allowing them to slide out. The batteries are typically housed tightly, so use the Allen key or another tool.
Step 4: Insert New Batteries
- With the old batteries removed, it is time to insert the new Duracell 357 batteries. These batteries are thin and cylindrical and should be inserted back to back with the correct alignment.
- If you encounter difficulty inserting the batteries, use the Allen key or a tool with a flat edge to assist in pushing them into place. Ensure that both batteries are securely seated.
Step 5: Test Laser
- Before reassembling the firearm, testing the guide rod laser with the new batteries is essential. Press the side button to activate the laser and observe the brightness and visibility. The laser should emit an intense, bright light, indicating that the new batteries function correctly.
- If applicable, test the laser in different modes, such as constant beam or pulsating light. This ensures that the laser performs optimally in various scenarios.
Step 6: Reassemble
- Once you’ve confirmed the proper functioning of the guide rod laser, it’s time to reassemble your Glock 43. Carefully slide the laser assembly back into place, ensuring it aligns correctly with the frame. Use the proper Allen key to tighten the screw securely. Remember, it’s a small metal screw going into plastic, so avoid over-tightening to prevent damage.
- After reassembly, conduct a final check of the laser’s functionality. Press the side button to activate the laser and verify that it responds as expected.
Now you know the complete Glock 43 LaserMax Installation. You can read our comprehensive buyer’s guide on Glock laser lights.
You can read our comprehensive buyer’s guide on Lasermax.
Last thought:
You’ve successfully learned a Glock 43 LaserMax Installation guide, enhancing its accuracy and precision. This straightforward process improves your firearm’s aiming capabilities and adds versatility to your shooting experience. Enjoy the benefits of a reliable guide rod laser, which provides a valuable tool for recreational shooting and self-defense scenarios.